Player - Hockey Gear Drying Rack
This thing has many names:
hockey drying rack
hockey tree
hockey scarecrow
Whatever you call it. I've made a DIY for one.
If you wish to make this in the same manner I have, here are the supplies you're going to need.
PVC connectors and end caps
PVC pipes
PVC cement (It's basically glue for PVC)
For the hockey tree
8 end caps
5 elbow joints
15 T joints
9 pipes at 20 cm or 8”
4 pipes at 17 cm or 7”
2 pipes at 40 cm or 16”
2 pipes at 60 cm or 24” (in the picture I cut my 24" pipe because I added the T joints for the arms later)
8 pipes at 30 cm or 12”
2 pipes at 7 cm or 3" (these 2 are just to extend the arms out to hang jerseys)
For the stick holder
1 Extra large end cap
1 Extra large pipe connector
2 zip ties.
**I strongly suggest putting it together first, then putting on the cement. Once that cement dries, there's no moving it**
hockey drying rack
hockey tree
hockey scarecrow
Whatever you call it. I've made a DIY for one.
If you wish to make this in the same manner I have, here are the supplies you're going to need.
PVC connectors and end caps
PVC pipes
PVC cement (It's basically glue for PVC)
For the hockey tree
8 end caps
5 elbow joints
15 T joints
9 pipes at 20 cm or 8”
4 pipes at 17 cm or 7”
2 pipes at 40 cm or 16”
2 pipes at 60 cm or 24” (in the picture I cut my 24" pipe because I added the T joints for the arms later)
8 pipes at 30 cm or 12”
2 pipes at 7 cm or 3" (these 2 are just to extend the arms out to hang jerseys)
For the stick holder
1 Extra large end cap
1 Extra large pipe connector
2 zip ties.
**I strongly suggest putting it together first, then putting on the cement. Once that cement dries, there's no moving it**
Goalie - Hockey Gear Drying Rack
I haven't built t
Credit for the goalie drying rack should go to user Atorak at "The Goalie Store". In the mean time, I'll put up pictures here and hope someone can build one and pass along the dimensions.
his one yet. When I do get a chance to build it, I will post up pictures.
Credit for the goalie drying rack should go to user Atorak at "The Goalie Store". In the mean time, I'll put up pictures here and hope someone can build one and pass along the dimensions.
Copyright © 2014 Ice Dragons Hockey Club All Rights Reserved.